10 / 36 EN
Refrigerator / User Manual
Installation
3.3. Adjusting the feet
If the product is not in balanced position,
adjust the front adjustable feet by
rotating right or left.
3.4. Power connection
A
WARNING
:
Do not use
extension or multi sockets in
power connection.
B
WARNING
:
Damaged power
cable must be replaced by
authorised Service.
C
When placing two coolers in
adjacent position, leave at
least 4 cm distance between
the two units.
•
Our firm will not assume
responsibility for any damages
due to usage without earthing and
power connection in compliance with
national regulations.
•
The power cable plug must be easily
accessible after installation.
•
Connect the refrigerator to an
earthed socket with 220-240V/50 Hz
voltage. The socket must comprise a
10-16A fuse.
•
Do not use multi-group plug with or
without extension cable between the
wall socket and the refrigerator.
3.5. Water connection
(Optional)
A
WARNING
:
Unplug the product
and the water pump (if available)
during connection.
The product can be connected to a
carboy or directly to the water mains,
depending on the model. To establish
the connection, the water hose must
first be connected to the product.
Check to see the following parts are
supplied with your product’s model:
3
1
4
2
*5
1.
Connector (1 piece): Used to attach the
water hose to the rear of the product.