11 / 36 EN
Refrigerator / User Manual
Installation
2.
Hose clip (3 pieces): Used to fix the
water hose on the wall.
3.
Water hose (1 piece, 5 meter diameter
1/4 inches): Used for the water
connection.
4.
Tap adapter (1 piece): Comprises a
porous filter, used for connection to the
cold water mains.
5.
Water filter (1 piece *Optional): Used to
connect the mains water to the product.
Water filter is not required if carboy
connection is available.
3.6. Connecting water
hose to the product
To connect the water hose to the
product, follow the instructions
below.
1.
Remove the connector on the hose
nozzle adaptor in the back of the
product and run the hose through the
connector.
2.
Push the water hose down tightly and
connect to the hose nozzle adaptor.
3.
Tighten the connector manually to fix
on the hose nozzle adaptor. You may
also tighten the connector using a pipe
wrench or pliers.
3.7. Connecting to
water mains
(Optional)
To use the product by connecting to
the cold water mains, a standard 1/2”
valve connector must be installed to the
cold water mains in your home. If the
connector is not available or if you are
unsure, consult a qualified plumber.
1.
Detach the connector (1) from the tap
adaptor (2).