-7-
Getting started
Remove your Television carefully from the box.
You may wish to store the packaging for future
use.
Please Note
When not in use disconnect the plug
from the
mains power supply.
Please Note
Do not leave the television in standby unattended
or overnight.
Switching the TV on for the first time
To install your TV, please read the sections
“TV controls” and “ Tuning the television”.
4.
Press the
Power
button on the side
of the TV. The standby indicator will
illuminate.
5.
Press a
Numeric
button or the
Program up
or
Program down
button
on the remote handset or
Program
up,
Program down
or
MENU
button
on the front panel to switch the TV
on.
The standby indicator remains on.
The picture will appear after a few
seconds.
Press the
Standby
button to switch the
TV to standby. The standby indicator will
brighten.
Please note
If you live in a poor reception area or use an
indoor aerial you may experience loss or
corruption of teletext transmissions.
In the box
Aerial connection
Switching on and First Use
1.
Connect the power cord to the mains adapter.
2.
Connect the input socket of the adapter to
the12 V DC socket at the back panel of the
LCD TV.
3.
Connect adapter to a suitable mains socket.
Note 1:
Your TV will switch to stand-by mode
in five minutes when there is no broadcast signal.
Note 2:
Your TV is equipped to operate with
front panel buttons, “MENU”, “PR+”, “PR-”,
“VOL+”, “VOL–” in case your R/C is broken or
the batteries are exhausted.
Inside the carton box you should have:
• Accessories box
• Power cord
• Adapter
• Remote control
• Batteries
Read these instructions before use.
You can use an outdoor or indoor aerial.
However, if you use an indoor aerial the quality
of the reception may be reduced and adjustment
of the aerial may be required when changing
programs.
To connect an aerial, plug the aerial lead
into the aerial socket on the rear of the
TV.
The batteries
Remove the remote back cover to reveal the
battery compartment and make sure you insert
the batteries the right way round.
Suitable battery types for this remote are
UM-4, IEC R03 or AAA 1.5V.
Do not throw your old batteries into a fire, dispose
of them in a designated disposal area.
Do not combine a used, old battery with a new
one or mix battery types.
The performance of the remote control will
deteriorate beyond a distance of 8 metres or
outside an angle of 30 degrees from the centre
of the TV.
7
Summary of Contents for 17WLB450S
