Beko 17WLB450S, Operating Instructions Manual

Page: 27 / 31

-28-
Help and service tips
The TV does not work
Make sure it is plugged into the mains supply
and switched on.
Poor picture
• Is the aerial plugged in?
• If you are using a set top aerial is it properly
aligned for the best signal.
• Make sure the aerial is not to close to neon
lights, loudspeakers etc.
• Try changing the direction of the outdoor
aerial. High buildings and mountains can
cause ghost pictures or double images.
• The picture quality may be reduced by
connecting two external sources at once.
Disconnect one of the sources.
•
Adjust the fine tuning.
No picture
•
Is the aerial plugged in properly?
•
Is the aerial lead damaged.
•
Are all the plugs in the aerial lead fitted
correctly?
• Have you pressed the correct buttons on
the remote control.
No sound
• Is the sound muted? Press the Mute
button.
• Is the volume turned down?
• Are there headphones connected.
• Check that tuning system selected is
PAL “I” not “B/G” refer to tuning menu to
change “B/G” to “I”.
Sound coming from only one speaker
• Is the balance set to one side?
See the sound menu.
• If you have external speakers, has one
of them become disconnected.
No response to the remote control
•
Try changing the batteries.
•
Is there an obstruction between the
remote control and the sensor on the
TV.
If nothing works
If you have tried the above solutions and none
seem to work, try switching the unit off and
on again.
If this does not work contact your supplier or
TV repair technician. Never attempt to repair
a defective TV yourself.