Bekamak BMSY 810CGH, Manual

Page: 17 / 45

Sensor Parts
(1)Blade broken pressure switch: this switch stops the main motor when the blade is broken and provides protection of
the operator and the machine from the damages that a broken blade can cause.
(2)Lower limit switch:
this limit switch stop the main motor and starts the bow’s upwards movement.
(3)Laser: It is used as a marker for indicating first touching point of the blade to material.
(4)Maximum switch: this switch sets the top point that bandsaw reaches.
(5)Digital Angle Encoder: It is using for reading the angle of bow.
(8)Fotocell: this switch starts the main motor when the blade approaches to the material about 30 mm after the bow begins
going down when start button is pressed. And in manual use, this switch stops the movement before the bow crashes to
material when the bow is going down.
(9)Protection cover switches: this switch
stops the machine if any cover is open.
1- Blade Broken Pressure Switch
2- Lower Limit Switch
3- Lazer
4- Maximum Switch
5- Dijital Encoder
6- Wheel Reductor
7- Wheel Motor
8- Protection Cover Switch
9- Fotocell