Bekamak BMSY 810CGH, Manual

Page: 4 / 45

Safety İ nstructions
➢ Be sure that electrical connection is made carefully. To avoid unwanted situations like electrical shock, protect the main supply cable with a holster.
➢
Before running the machine, be sure that all of the protections are mounted properly and all the covers are closed.
➢
Avoid from smoke and moisture.
➢
Please use the parts and equipments which are recommended. Usage of unsuitable parts and materials which are bigger than the capacity of the machine can cause unwanted situations.
➢
Check the machine and inform the defects everyday.
➢ Don’t leave any material after chancing the band.
➢
Do not hold the material while the machine is cutting. Always tighten the material by using essential parts.
➢ Please pay attention to choose the area of the machine which doesn’t include anything that creates difficulties to control th e machine
➢
Please be sure that the teeth of the band are looking to correct direction.
•
Don’t leave the band on the ground or any place that is dangerous for other people.
•
Be careful when using the machine and keep the working area clean ( clean the saw dusts and oil traces )
•
Pay attention to security instructions when using the machine.
•
Don’t wear loose cloths when using the machine.
•
Regardless use the protective gloves when using the machine.
•
Don’t get close too much to the machine when running.
•
Before carrying out any cleaning or maintenance procedure, disconnect the machine from main supply.
•
İ n some conditions, noise level can be about 85 db. Band choice and cutting speed is important factor for noise level.
•
İ llumination is an important factor for security.
•
Ratio of coolant liquid is important for obtaining optimum lubrication.
•
Never use the machine if you notice any fault of the machine or absence of any part of the machine.
-
Control the emergency button at least once a week and be sure that it is working properly.