© BEKA 201 All rights reserved
5
!
...a product of BEKA
4.
Use in accordance with the regulations
The central lubrication pump is
approved for the
only
industrial use.
Only operate the central lubrication pump if it is installed in/to another machine and operated
together with this. Supply only lubricant according to the machine maufacturer´s specification. The
central lubrication pump must only be used according to the technical data (see chapter 1
„technical data“). Never exceed the mentioned values. Never operate the central lubrication pump
without lubricant.
Unauthorized changes
not permitted
of the central lubrication pump are
. We are not liable for damages of machine or
persons that result from unauthorized use.
Use according to the regulations is also:
·
Observe all chapters and notes in the operating manual
·
Carry out all maintenance works
·
Observe
work safety and accident prevention
all regulations concerning
during the life cycles of the device.
·
Observe to have the necessary training and authorization to operate the central lubrication pump and carry out the
necessary works.
Another use or a use beyond is not according to the regulations.
5.
Scope of guarantee
Guarantee in regards to operational safety, reliability and performance will only be granted by the manufacturer if the
central lubrication pump is used according to the regulations.
·
Assembly, connection and maintenance are carried out by professional staff.
·
The central lubrication pump is only used according to the operating manual.
·
Never exceed the limit value indicated in the technical data.
·
Alterations and repairs at the centr l lubrication pump may only be done by BEKA.
a
Guarantee and warranty will expire in case of damages at the device that results from improper
lubricant (e. g. wear of piston, piston jamming, blockades, brittled sealing etc.).
BEKA does not assume guarantee for lubricants damages also if they were tested and authorized
by the BEKA laboratory as damages due to lubricant (for exam le overlaying, improper stored
p
lubricants, batch changes etc.) cannot be reproduced afterwards.
Attention!
Attention!
Attention!
7