© BEKA 201 All rights reserved
5
!
...a product of BEKA
7.6.2
Read out error and warning report when using a progressivee lubrication system
The error and warning report can be read out via the display of the control unit or via the BEKA-DiSys software (from
version V4.0.8.502).
·
Press OK to get into setting mode.
·
Use the control buttons to choose „error messages“ and confirm with OK.
Fig. 16:
The operating data base is opened and the last entered error or the last entered warning is displayed.
Date and time for occuring error is shown as well as for the reset error.
Fig. 17:
The display shows the number of current messages, message quantity and total number of messages.
If more error or warnings are shown, use the control buttons to scroll up or down. You can also display previous errors and
warnings (total number of message), by scrolling with the control buttons.
Press ESC to get out of the error and warning report.
message
Fehler kommt
no pressurization
during monitor. time
Date:
Time:
107.1/178
20.01.14
10:41:24
Number of
current message
Quantity of
current messages
Total number of messages
settings
error messages
*
17