23
8.3.3 Alarm enable: EnbL
This function allows the alarm to be enabled or
disabled without altering any of the alarm
parameters. To check or change the function
select 'EnbL' from the alarm menu and press P
which will reveal the current setting. The function
can be changed by pressing the Up or Down
button followed by the E button to return to the
alarm menu.
8.3.4 Type of alarm: tYPE
This function conditions the alarm to operate on
the rate or total display. Alarm 1 and Alarm 2 may
both be conditioned as rate or total alarms, or one
may be conditioned for rate and the other for total.
To check or change the type of alarm, select 'tYPE'
from the alarm menu and press P which will reveal
the current setting. The function can be changed
by pressing the Up or Down button followed by the
E button to return to the alarm menu.
Note:
To prevent accidental setting, the alarm
must be re-enabled after the alarm type has been
changed – see 8.3.3
Fig 12 Alarm programme menu
