10.3.4 Alarm enable:
EnbL
This function allows the alarm to be enabled or
disabled without altering any of the alarm parameters.
Using the
&
or
*
push button select
AL1
or
AL2
from the configuration menu and press
(
to reach
EnbL
in the alarm sub-menu. Pressing
(
will then
reveal the existing setting. The function can be
changed by pressing the
&
or
*
push button
followed by the
)
button to return to the alarm sub-
menu.
10.3.5 Type of alarm:
tYPE
Alarm 1 and Alarm 2 are totally independent, both
may be rate or total alarms, or one may be
conditioned for rate and the other for total.
Using the
&
or
*
push button select
tYPE
from
the selected alarm sub-menu and press
(
to
check or change the function. The
&
or
*
push
button will toggle the selection between
rAtE
and
totAL
, when set as required press the
)
button to
return to the alarm sub-menu.
Note:
When
tYPE
is changed, the alarm
configuration is automatically reset to the
default values and the alarm is disabled. It
must therefore be reconfigured before use.
38
Summary of Contents for BA364NG
Page 1: ...Issue 6 9th July 2019 BA364NG Two Input Ex nA and Ex tc Counter Issue 6 ...
Page 4: ...4 ...
Page 18: ...18 ...
Page 19: ...19 ...
