BEKA BA364E, Manual

Page: 38 / 60

10.3.4 Alarm enable:
EnbL
This function allows the alarm to be enabled or
disabled
without altering any of the alarm
parameters. Using the
&
or
*
push button select
AL1
or
AL2
from the configuration menu and press
(
to reach
EnbL
in the alarm sub-menu. Pressing
(
will then reveal the existing setting. The function
can be changed by pressing the
&
or
*
push
button followed by the
)
button to return to the
alarm sub-menu.
10.3.5 Type of alarm:
tYPE
Alarm 1 and Alarm 2 are totally independent, both
may be rate or total alarms, or one may be
conditioned for rate and the other for total.
Using the
&
or
*
push button select
tYPE
from the
selected alarm sub-menu and press
(
to check or
change the function. The
&
or
*
push button will
toggle the selection between
rAtE
and
totAL
, when
set as required press the
)
button to return to the
alarm sub-menu.
Note: When
tYPE
is changed, the alarm
configuration is automatically reset to the
default values and the alarm is disabled. It
must therefore be reconfigured before use.
38