BEKA BA337E, Manual

Page: 27 / 61

6.18 Local reset:
LoC CLr
The Local reset function contains two sub-functions
Clr tot
and
Clr gtot
which when enabled allow the
total display and grand total to be reset to zero via the
instrument push buttons while the Rate Totaliser is in
the totalisation mode.
6.19 Local total reset:
Clr tot
Clr tot
is a sub-menu in the
LoC clr
function which
when activated allows an operator to reset the total
display to zero while in the totalisation mode by
operating the
&
and
*
push buttons simultaneously
for more than three seconds.
Select
loc clr
in the configuration menu and press
(
which will reveal the
clr tot
prompt and operate
(
again which will show if the local total reset is
on
or
oFF
. If set as required operate the
)
button twice
to return to the configuration menu, or the
&
or
*
button to change the setting followed by the
)
button
twice to enter the change and return to the
loc clr
prompt in the configuration menu.
Note:
The total display may also be reset to zero
remotely by connecting terminals RS1 and RS2
together for more than one second.
See
sections 3.6; 4.1.8 and 4.2.8 of this manual.
6.20 Local grand total reset:
clr gtot
The grand total is a separate sixteen digit counter
which is incremented in parallel with the total display,
but is not zeroed when the total display is reset to
zero.
The grand total may be viewed in the
totalisation mode in two eight digit sections as
described in section 2.2 of this manual.
Clr gtot
is a sub-menu in the
loc clr
function which
when activated allows the operator to reset the grand
total display to zero in the totalisation mode by
operating the
)
and
*
push buttons simultaneously
for more than ten seconds.
Select
loc clr
in the configuration menu and press
(
which will reveal
clr tot
. Using the
&
or
*
button to select
clr gtot
and press
(
which will
show if local grand total reset is
on
or
oFF
. If set as
required operate the
)
button twice to return to the
configuration menu, or the
&
or
*
button to change
the setting followed by the
)
button twice to enter
the change and return to the
LoC .clr
prompt in the
configuration menu.
6.21 Grand total reset from configuration
menu:
Clr Gtot
The grand total is a separate sixteen digit counter
which is incremented in parallel with the total
display, but is not zeroed when the total display is
reset to zero. The grand total may be viewed in the
totalisation mode in two eight digit sections as
described in section 2.2 of this manual.
The grand total can be reset to zero from within the
configuration menu using this
CLr. Gtot
function, or
from the totalisation mode if sub-function
clr gto
t in
the
loc clr
function is activated - see 6.20.
To zero the grand total from within the configuration
menu select
CLr Gtot
and press
(
which will
cause the instrument to display
Clr . no
with
no
flashing. Press the
&
or
*
push button until
Clr . YE5
is displayed and then press
(
which will
result in a
0000
prompt being displayed with the first
digit flashing. This is a request for the instruction to
be confirmed by entering
5urE
using the
&
or
*
buttons and the
(
button to move control to the
next digit. Pressing
)
will then reset the grand
total to zero and return the Rate Totaliser to the
configuration menu.
Note:
Once reset, the grand total can not be
recovered.
6.22 Security code:
CodE
Access to the instrument configuration menu may be
protected by a four digit security code which must be
entered to gain access.
New instruments are
configured with the default security code
0000
which
allows unrestricted access to all configuration
functions.
To enter a new security code select
CodE
from the
configuration menu and press
(
which will cause
the Rate Totaliser to display
0000
with one digit
flashing. The flashing digit may be adjusted using
the
&
or
*
push buttons, when set as required
operating the
(
button will transfer control to the
next digit. When all the digits have been adjusted
press
)
to return to the
CodE
prompt. The revised
security code will be activated when the Rate
Totaliser is returned to the totalisation mode.
Please contact BEKA associates sales department if
the security code is lost.
27