2
1.
Description
2.
Operation
2.1
Controls
3.
Certification
3.1
IECEx & ATEX Ex eb certification
3.2
Zones, gas groups & T rating
3.3
Specific conditions of use
3.4
Certification label information
4.
System Design for Gas Hazardous
Areas
4.1
Transmitter loops
4.2
Remote indication
4.3
Monitoring hazardous area equipment
5.
Installation
5.1
Location
5.2
Earthing
5.3
Cable gland and conduit fittings
5.4
Cables and wiring
5.5
Installation procedure
5.6
EMC
5.7
Units of measurement and tag marking
on scale card.
6.
Configuration and Calibration
6.1
Summary of configuration functions
6.2 Indicator function:
FunC
6.3
Resolution:
rE5n
6.4
Position of the decimal point:
dP
6.5
Calibration using an external current
source:
CAL.
6.6
Calibration using internal reference:
5Et
6.7
Bargraph format and calibration:
bAr
6.8
Function of the
(
push-button:
C--P
6.9
Tare function:
tArE
6.10 Security code:
CodE
6.11 Reset to factory defaults:
r5Et
6.12 Under and over-range
7.
Lineariser
7.1
Lineariser calibration using an external
current source.
7.1.1
Example, Adding break-points
to a new indicator.
7.2
Lineariser calibration using internal
reference.
7.2.1
Example, Adding break-points
to a new indicator.
7.3
Under and over-range
7.4
Lineariser default configuration
8.
Maintenance
8.1
Fault finding during commissioning
8.2
Fault finding after commissioning
8.3
Servicing
8.4
Routine maintenance
8.5
Guarantee
8.6
Customer comments
9.
Accessories
9.1
Units of measurement and instrument
identification.
9.2
Display backlight
9.3
Pipe mounting kit
9.4
Panel mounting kit
Appendix 1
Ex tb dust certification
CONTENTS
The BA304SG and BA324SG are CE marked to show compliance with the European Explosive
Atmospheres Directive 2014/34/EU and the European EMC Directive 2014/30/EU
