12
User manual
DMX Tool
2.4
Address
Before running the coding, select the coding mode in the address
menu. Select the "write address" button on the encoder main
interface and cut it to the lamp address interface (Figure 3).
Figure 3
1)
Select chip model: click the chip select button to select the lamp (YM-3H, YM-3G, YM-
HDH, UCS512AB, UCS512C, UCS512D, UCS512E, UCS512F, SM16512, SM1751X, SM1752X,
SM17500 ) to encode.
Note: RGBCCT chip type is UCS512G6. RGB, CCT, RGBW chip type is UCS512H4.
2)
Channel: coded channel number of the lamp.
3)
Address/ lamp: starting lamp address (usually from 1), this button displays
“
addr
”
for
address code. Display
“lamp”
for lamp code.
4)
Brightness: Brightness of test lamp.
5)
Start coding: select the chip model, channel, address number, click the
“Start coding”
button below to code the lamp (there will be a progress bar display when coding coding).
Note: When you press the start coding button, no button of self test or manual test can be
opened, otherwise the coding may fail.
6)
Self-test: After successful coding, click the "self-test" switch, the encoder will
automatically check the lamp according to the number of addresses.
