Installation
Operating manual AVERO Phoenix
V2.1 E
Page 12 of 35
6.3 First start-up
WARNING
The equipment is to be used exclusively in accordance with
the accompanying documents.
Only when these conditions are met, the manufacturer
considers himself responsible for the impact on the safety,
the reliability and the function of the device.
In the event of a new connection of a AVERO Phoenix lifting
bath tub, the technical data must be observed.
WARNING
To prevent scalding, the hot/cold water mixer must be set up
in accordance with the local water supply prior to the first
use.
Please consult the attached user manual to this effect.
The settings must be documented.
NOTE
In order to ensure a safe functioning and operation, we
recommend a regular maintenance and set-up of the
thermostatic mixer. These maintenance works are to be
carried out by a qualified technician.
Due to the relocation of the AVERO Phoenix lifting bath tub
to another room either changes to the local water supply, a
readjustment of the thermostatic mixer could be required.
CAUTION
Should your bath tub be equipped with an optional automatic
disinfecting unit, the latter must be set prior to the first use.
Please consult the attached user manual to this effect.
