Beijing Huitianwei Technology Co., Ltd.
27
○
Demolition, armored head operation
Here's head refers to the print head, but we just need to disassemble part of it.
○
Why dismantle head
When we refueling improper operation, or when there is a problem of the
material itself, Some material has the potential to melt jam in the print header,
resulting print no filling or insufficient quantity, this time on the need to be
removed to be cleaned.
○
Some parts require disassembly
Viewed from the front, the print head from the outside inwards are: cooling fan,
black fins, cover feeder, feeding of gear in the metal layer, general clogged
material on the winding gear in the vicinity of the feeding, so we need to turn
detached from the outside inwards.
○
Demolition, armored head operation specific
The first step, remove the four corners of the fan screws with a Phillips
screwdriver, remove the fan (Figure 5-17);
(Figure 5-17)
The second step, with distribution wrench to remove the two screws on the
black fins, demolition fins (Figure 5-18);
