Image and CODESYS update
5
Image and CODESYS update
The operator panel comes pre-loaded on delivery with an image.
iX Runtime can be updated via ethernet using a PC.
The Image Loader utility is used to create Image Loader SD cards and USB-sticks
or to transfer a panel image to an operator panel over ethernet.
The image can be updated in the following way:
Update method
iX Developer project remains
IP adress remains
Ethernet
X
X
USB
X
X
SD
X
X
Recovery SD card
-
-
If you want a complete system update, choose Make Recovery SD card. The
iX Developer will then be set to default settings, except for touch.
5.1 Updating the panel image using USB
or SD card
5.1.1
Preferred way
Using a USB flash drive or SD card to update the image in an operator panel is the
preferred method of updating the panel. This makes it possible to upgrade the
panel image without the use of a PC.
Beijer Electronics, MAEN205G
19
