D
Sound module USM-RC-2
44
BEIER-Electronic
03.02.2014
bending lights are also front fog lights and can thus also switched by the function
"front fog light". The switching on and off of the bending lights is not immediate, but
with a dimming function.
Output „combined headlight“
Using the combined headlight,
“parking light“
,
“low beam headlight“
and
“high
beam headlight“
can be switched using just one output.
The Intensity for each of the 3 lights can be adjusted seperately:
The intensity of the parking light is entered under
“intensity“
(e.g. 10%).
The intensity of the low beam headlight is entered under
“Option 1“
(e.g. 30%).
The intensity of the high beam headlight is entered under
“Option 2“
(z.B. 60%).
However, it should be noted that these 3 intensities are added, if more than one light
is switched on. Summing up, you should avoid a value that is over 100%.
Output “combined back light“
Using the combined rearlight,
“parking light“
,
“brake light“
and
“rear fog light“
can be switched using just one output.
The Intensity for each of the 3 lights can be adjusted seperately:
The intensity of the parking light is entered under
“intensity“
(e.g. 10%).
The intensity of the brake light is entered under
“Option 1“
(e.g. 30%).
The intensity of the rear fog light is entered under
“Option 2“
(z.B. 60%).
However, it should be noted that these 3 intensities are added, if more than one light
is switched on. Summing up, you should avoid a value that is over 100%.
Output “in motion on“
This output is always switched on when the model is in motion, whether it is moving
forwards or in reverse.
Output “in stationary on“
This output is always switched on when the model is stationary.
Output “at accelerating on“
This output is always switched on briefly as soon as the model accelerates from rest.
Output “at driving speed on“
This output is switched on when the model exceeds the running speed previously
selected in the Sound-Teacher. The value is entered under
“Option 1“
.