GB
Sound module USM-RC-3
11.10.2021
BEIER-Electronic
81
Configuration - Outputs - Output options
If the function “Light flickering when starting“ is activated, all 16 outputs will flicker
while the starting noise (coldstart or warmstart) is played.
The light bulb effect can be set in 3 levels: Light, medium and strong.
Brake lights:
If the selection „Brake light always on at stationary“ is activated, the brake light is
always turned on whenever the model is standing.
An adjustable afterglow of the brake light can also be activated.
If "Emergency brake while heavy braking" is activated the brake light flashes at a
frequency of 3Hz during heavy braking. The duration for the flashing is defined in
"Brake light remains on for: X seconds". If in addition the option “Hazard warning
lights automatically on after emergency brake light” the hazard lights turn
automatically on after heavy braking. The lights remain on, as long as they are
switched off manually or the vehicle starts moving.
The brake light threshold determines how strong the vehicle must be decelerated
before the brake light is activated. The higher the threshold, the stronger the
deceleration must be in order to activate the brake light.
Values between 1 and 30
are possible.
The emergency brake light threshold determines how strong the vehicle must be
decelerated before the emergency brake light is activated. The higher the threshold,
the stronger the deceleration must be in order to activate the emergency brake light.
Values between 1 and 30 are possible.
Indicator lights:
If the selection „Hazard light automatically on when reversing“ is activated, the two
indicator lights are on, once the model is reversing.
