D
Infrared Light Module SM-IR-16-2
10
BEIER-Electronic
April 03. 2012
Outputs 1-12
Outputs 1-12 are a copy of the 12 outputs of the USM-RC-2. This means that every
time an output switches on the USM-RC-2, the output on the SM-IR-16-2 also
switches.
Example:
Output 10 on the sound module is configured as “Blinker right”. When the blinker is
activated on the right, Output 10 on the sound module (blinker for towing vehicle) and
also Output 10 on the light module (blinker for trailer) will blink.
!!! CAUTION !!!
The 16 switch outputs are not short-circuit-proof!
A short circuit or an overload will destroy the outputs!
Destroyed outputs are not covered by warranty since they have clearly been
caused by improper connection.
Outputs 13-16
The 4 outputs 13-16 have different specialized light functions:
All-round light (1x4-channel or 4x1-channel)
Blinker/flasher
Chaser light (4-channel or 8-channel)
The specialized light functions are clearly assigned to these outputs and cannot be
configured to other outputs.
There are other options for the all-round light and the chaser light, which can be
configured via DIP Switch S1.1 – S1.3.
The speed of specialized light functions can be adjusted with trimmer P1.
1-channel all-round light (4 pieces)
The 1-channel all-round light with one output simulates a rotating all-round light. Of
course, the light does not actually turn; the effect is created by a constant increase
and decrease of brightness. From a distance the light appears to be rotating.
There are a total of 4 pieces for the 1-channel all-round light. The speeds of the 4 all-
round lights are purposefully set at different speeds. They are not synchronized.
The speed of the 1-channel all-round lights can be adjusted with trimmer P1.
