D
Infrared Light Module SM-IR-16-2
April 03. 2012
BEIER-Electronic
11
4-channel all-round light (1 piece)
The 4-channel all-round light is an improved version of the 1-channel all-round light.
The all-round light with 4 outputs simulates a rotating all-round light. The 4 connected
lamps/LEDs of the 4-channel all-round light also do not actually rotate; the effect is
once again created by increasing and decreasing the brightness of the 4 outputs.
The speed of the 1-channel all-round light can be adjusted with trimmer P1.
Flasher/blinker (4 pieces)
If the flashers/blinkers are activated, outputs 13-16 will flash at different rhythms.
These 4 outputs are always activated at the same time. The different flash-/blink
options let you choose the desired output. A combination of several outputs can
create interesting effects (e.g. modern flashing police lights with 3 LEDs at outputs
13, 14 and 15).
Output 13:
Short flash impulse
Output 14:
Short double light impulse
Output 15:
Short double light impulse, chronologically offset to Output 14.
Output 16:
Blinker
The speed of the flasher/blinker can be adjusted with trimmer P1.
Chaser light (4-channel or 8-channel)
A 4-channel chaser light can be created via the 4 outputs 13-16.
Outputs 9 - 12 are also used for the 8-channel chaser light. These outputs cannot be
actuated from the sound module.
The DIP Switch S1.2 determines the type of chaser light:
DIP Switch S1.2 off
4-channel chaser light (Outputs 13 – 16)
DIP Switch S1.2 on
8-channel chaser light (Outputs 9 – 16)
2 different operating options can be selected via DIP switch 3:
DIP Switch S1.3 off
Chaser light only runs in one direction.
DIP Switch S1.3 on
Chaser light runs back and forth.
The speed of the chaser light can be adjusted with trimmer P1.
