Thank you for showing your confidence in us by purchasing the
Behringer ULTRA METAL UM300. This high-quality effects pedal comes
with a dual-gain circuitry that enables you to produce super thick, tube-
like distortion plus endless sustain. Thanks to its high-performance
features you will achieve the most extreme and sought-after hard rock
or heavy metal distortion sounds.
1. Controls
(1)
The
LOW
control allows yu to boost/cut the lo-frequency range.
◊◊
Please keep in mind that extrme distortion and EQ
settings will increase nose and may induce oscillation.
(2)
The two
MID FREQ
(uency) controls allow to boost/cut a dè ned
mid-frequency range. The upper control is used to increase
or lower the mid range, the cntrol below adjusts the center
frequency of the mid range that is affected (200 Hz to 5 kHz).
(3)
The
LEVEL
control adjusts the output level.
(4)
The
ON/BATT
LED illumnates when the effect is activated. It also
serves as a battery leve indicator.
(5)
Use the footswitch to activate/deactivate the effect.
(6)
Use this ¼" TS
IN
connector to plug in the instrument cable.
(7)
The ¼" TS
OUT
connector sends the signal to your amp.
Use the
DC IN
connection to plug in a 9 V power supply (not included).
The
BATTERY COMPARTMENT
is located underneath the pedal cover.
To install or replace the 9 V battery, press the hinges with a ballpen and
remove the pedal cover. Be careful not to scratch the unit.
V
1
.0
ULTRA METAL UM300
Heavy Metal Distortion Effects Pedal
(3)
(1)
(5)
(4)
(7)
(2)
(8)
(6)
(9)
Summary of Contents for ULTRA METAL UM300
Page 24: ......
