Page 10 of 20
NOX606 Top Panel
AUX 1/2 knobs
adjust channel
signal level at AUX
SEND 1 and 2 jacks,
PRE buttons send
signal to AUX SEND
jack pre-fader
MIC/RTN switch
selects XLR MIC or
stereo 1/4" RETURN
inputs as channel
audio source
MIC GAIN knob
controls sensitivity
of mic input
MIC EQ knobs
adjust channel
equalization
CUE button allows
source monitoring
without inclusion
in master output
INTENSITY
fader adjusts
effect’s
mix or
resonance
parameter
FREQUENCY
knob adjusts
effect’s
frequency or
time-based
parameter
FX DISPLAY
indicates
selected
effect
INPUT SELECT
switch selects
channel audio
source
CHANNEL EQ
knobs boost/
cut high,
mid and low
frequencies
GAIN knob
controls
channel
input
sensitivity
FX SELECT
knob scrolls
through
available
effects, pressing
knob confirms
selection
TAP button
allows effect’s
tempo
parameter to
be entered
manually
LFO ON
button
FX ON
button
activates
digital effects
processor
MASTER VU
METER displays
master output
and/or cue
signal level
X2 TEMPO
button
doubles
LFO speed
TAP button
allows LFO
speed to be
entered by
tapping with
music
MONO button
switches
BOOTH signal
from stereo to
mono
MIX 2 knob
adjusts level of
MIX 2 1/4" jacks
on rear panel
MIX 1 knob
adjusts level
of MIX 1 XLR
outputs on
rear panel
LFO DEPTH knob
adjusts amount of
LFO (low-frequency
oscillator)
modulation
applied to filter
MIDI ON button
sends MIDI start/
stop data to
external sequencer
DATA/MIDI knob
allows adjustment
of data, such as
MIDI clock speed
FX CUE button
sends effect to
cue section for
preview
CHANNEL
VU METER
displays
input source
signal level
FX ASSIGN
knob selects
which sources
are affected
by effect
NOX1010/NOX606
NOX404/NOX303
NOX202
