background image

Page 2 of 20

Awesome 3-band EQ with switchable 
full-kill filters plus 8-segment level 
meters with peak hold function 
per channel

Premium phono and XENYX mic 
preamps for superior detail and 
ultimate punch

3 Line inputs with USB connectivity, 
3 Phono/Line and 1 Mic input

VCA-controlled faders with fader 
start for utmost reliability and 
noise-free performance

Sophisticated headphone monitoring 
section with tone control of 
headphone output

Extensive XLR Master, Record and 
Booth outputs

NOX404: Premium 6-Channel DJ Mixer 
with infinium “Contact-Free” VCA 
Crossfader, Beat-Syncable FX, VCFs and 
USB Audio Interface

Premium 6-channel club DJ mixer for 
the most demanding turntablist, 
remixer and digital DJ

Beat-syncable FX section with 
2 parameter controls assignable to 
Mic, 1, 2, CFA, CFB or Master

2 mind-blowing VCFs (Voltage 
Controlled Filters) can be assigned to 
any channel or crossfader side

2 independent LFOs (Low Frequency 
Oscillators) for awesome 
filter modulation

6 Line and USB inputs, 4 Phono/Line 
plus 2 Mic/Line inputs—all channels 
with Gain control, switchable EQ and 
level meter

Beat-syncable FX

A useful and powerful addition 

to NOX Series mixers is the internal 
effects engine. This processor offers 12 
high-quality digital effects that can be 
assigned to the microphone, channel 1 
or 2, crossfader A or B, or the main mix. 
Each effect has several parameters that 
can be adjusted to suit your purpose. In 
general, the TAP button is used to beat-
sync the effect to the tempo of the music 
by pressing it in rhythm. The INTENSITY 
fader usually controls the wet/dry mix 
of the effect (how much is blended with 
the unaffected signal). The FREQUENCY 
knob can have various assignments. In 
beat-sync mode (engaged by tapping 
the rhythm with the TAP button), it will 
determine the tempo multiple. It can also 
adjust the rate on its own, if beat-sync is 
not engaged or not available. 

Here’s a brief description of the FX 

available in every NOX Series mixer: 
•  2XCOPY:  Makes a copy of the signal, 

which is delayed by a defined time. 

•  TAPE ECHO:   A simulation of the 

echo effect that occurs between 
two tape reels, which has a warm, 
slightly decayed sound. 

•  ECHO:  A more modern delay effect, 

which is very useful for juggling beats 
and emphasizing musical phrases. 

•  FLANGER:  A flanger is a wave-like 

effect that modulates the signal. 

•  PHASER:  A sweeping phase shifter 

effect. It is similar to a flanger, 
except that it is enharmonic, 
producing a more “swooshing” sound. 

•  LP and HP FILTER:  A Low Pass 

filter cuts out any frequency above 
its parameter settings. A High Pass 
filter cuts out frequencies below its 
parameter settings. 

•  AUTO PAN: Automatically moves the 

signal from one side of the stereo 
image to the other. 

•  VOCODER: Creates a robot voice 

sound straight from the early days of 
electronic music. 

•  REVERB: This is a classic effect that 

adds space and air to the sound. 

•  REV REVERB: Reverse reverb. 
•  LMT+DIST: Band-limited distortion 

creates a tight, compressed and 
distorted sound to any signal. 

Total Control

The NOX202, NOX303, NOX404 and 

NOX1010 models provide superb tone 
control, thanks to a 3-band EQ and full-kill 
filters, Gain control and precise level meter 
per channel. Meanwhile, the NOX606 
features 4-band channel EQ and level 
meter for MAIN output, plus a post-fader 
mono output to drive subwoofers. All NOX 
Series mixers feature extensive headphone 
monitoring and cueing options.

NOX202 
If the NOX202 had a middle name it 

would be “easy.” The NOX202’s intuitive 
layout makes it easy to operate right out 
of the box. Beneath its elegant exterior 
lies the heart of a 2-channel DJ battle 
mixer complete with a beat-syncable 
FX section, 3-band channel EQ and full-kill 
filters. Premium-grade phono preamps, 
along with our legendary XENYX mic 
preamps, ensure the ultimate in signal 
integrity and punch. And thanks to 
NOX202’s onboard USB audio interface 
you can add your MP3s to the mix with 
just the flick of a switch. The NOX202 is a 
veritable killer in its weight class!

NOX303 
Armed with many of the same 

features as the NOX202, the NOX303 
features an additional input channel 
and VCA-controlled faders with fader 
start, which allows you to seamlessly 
integrate auto-start capable CD players. 
You get our outstanding phono and 
XENYX mic preamps, renowned for 
their superior sonic integrity and wide 
dynamic range, along with built-in USB 
connectivity. State-of-the-art, beat-
syncable FX processing and balanced 
XLR Master Outputs round out this 
mighty middleweight.

Continued on next page

NOX1010/NOX606 

NOX404/NOX303 

NOX202 

Summary of Contents for NOX202





















Reviews: