background image

14

EUROPOWER PMX1000/PMX3000/PMX5000

7. WARRANTY

§ 1 WARRANTY CARD/ONLINE REGISTRATION

To  be  protected  by  the  extended  warranty,  the  buyer  must

complete and return the enclosed warranty card within 14 days of

the  date  of  purchase  to  BEHRINGER  Spezielle  Studiotechnik

GmbH, in accordance with the conditions stipulated in § 3. Failure

to return the card in due time (date as per postmark) will void any

extended warranty claims. Based on the conditions herein, the

buyer may also choose to use the online registration option via

the Internet (www.behringer.com or www.behringer.de).

§ 2 WARRANTY

1. BEHRINGER (BEHRINGER Spezielle Studiotechnik GmbH

including  all  BEHRINGER  subsidiaries  listed  on  the  enclosed

page, except BEHRINGER Japan) warrants the mechanical and

electronic  components  of  this  product  to  be  free  of  defects  in

material and workmanship for a period of one (1) year* from the

original  date  of  purchase,  in  accordance  with  the  warranty

regulations described below. If the product shows any defects

within the specified warranty period that are not excluded from

this warranty as described under § 4, BEHRINGER shall, at its

discretion, either replace or repair the product using suitable new

or reconditioned parts. In the case that other parts are used which

constitute an improvement, BEHRINGER may, at its discretion,

charge the customer for the additional cost of these parts.

2. If the warranty claim proves to be justified, the product will

be returned to the user freight prepaid.

3.  Warranty  claims  other  than  those  indicated  above  are

expressly excluded.

§ 3 RETURN AUTHORIZATION NUMBER

1. To obtain warranty service, the buyer (or his authorized dealer)

must call BEHRINGER (see enclosed list) during normal business

hours 

BEFORE

  returning  the  product.  All  inquiries  must  be

accompanied by a description of the problem. BEHRINGER will

then issue a return authorization number.

2. Subsequently, the product must be returned in its original

shipping carton, together with the return authorization number to

the address indicated by BEHRINGER.

3. Shipments without freight prepaid will not be accepted.

§ 4 WARRANTY REGULATIONS

1.  Warranty  services  will  be  furnished  only  if  the  product  is

accompanied by a copy of the original retail dealer’s invoice. Any

product deemed eligible for repair or replacement under the terms

of this warranty will be repaired or replaced.

2. If the product needs to be modified or adapted in order to

comply with applicable technical or safety standards on a national

or local level, in any country which is not the country for which the

product  was  originally  developed  and  manufactured,  this

modification/adaptation  shall  not  be  considered  a  defect  in

materials or workmanship. The warranty does not cover any such

modification/adaptation, irrespective of whether it was carried out

properly or not. Under the terms of this warranty, BEHRINGER

shall not be held responsible for any cost resulting from such a

modification/adaptation.

3. Free inspections and maintenance/repair work are expressly

excluded from this warranty, in particular, if caused by improper

handling of the product by the user. This also applies to defects

caused  by  normal  wear  and  tear,  in  particular,  of  faders,

crossfaders, potentiometers, keys/buttons, tubes and similar parts.

4. Damages/defects caused by the following conditions are not

covered by this warranty:

s

improper handling, neglect or failure to operate the unit in

compliance with the instructions given in BEHRINGER user

or service manuals.

s

connection or operation of the unit in any way that does not

comply with the technical or safety regulations applicable in

the country where the product is used.

s

damages/defects  caused  by  force  majeure  or  any  other

condition that is beyond the control of BEHRINGER.

5. Any repair or opening of the unit carried out by unauthorized

personnel (user included) will void the warranty.

6. If an inspection of the product by BEHRINGER shows that

the defect in question is not covered by the warranty, the inspection

costs are payable by the customer.

7. Products which do not meet the terms of this warranty will be

repaired  exclusively  at  the  buyer’s  expense.  BEHRINGER  will

inform the buyer of any such circumstance. If the buyer fails to

submit  a  written  repair  order  within  6  weeks  after  notification,

BEHRINGER will return the unit C.O.D. with a separate invoice

for freight and packing. Such costs will also be invoiced separately

when the buyer has sent in a written repair order.

§ 5 WARRANTY TRANSFERABILITY

This  warranty  is  extended  exclusively  to  the  original  buyer

(customer of retail dealer) and is not transferable to anyone who

may subsequently purchase this product. No other person (retail

dealer,  etc.)  shall  be  entitled  to  give  any  warranty  promise  on

behalf of BEHRINGER.

§ 6 CLAIM FOR DAMAGES

Failure of BEHRINGER to provide proper warranty service shall

not entitle the buyer to claim (consequential) damages. In no event

shall the liability of BEHRINGER exceed the invoiced value of the

product.

§ 7 OTHER WARRANTY RIGHTS AND NATIONAL LAW

1. This warranty does not exclude or limit the buyer’s statutory

rights  provided  by  national  law,  in  particular,  any  such  rights

against  the  seller  that  arise  from  a  legally  effective  purchase

contract.

2. The warranty regulations mentioned herein are applicable

unless they constitute an infringement of national warranty law.

*  Customers  in  the  European  Union  please  contact

BEHRINGER Germany Support for further details.

7. WARRANTY

Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time

of printing. SPEAKON

®

 as well as the names of companies, institutions or publications pictured or mentioned and their respective

logos are registered trademarks of their respective owners. Their use neither constitutes a claim of the trademarks by

BEHRINGER

®

 nor affiliation of the trademark owners with BEHRINGER

®

. BEHRINGER

®

 accepts no liability for any loss which may

be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein.

Colors and specifications depicted may vary slightly from product. No part of this book may be reproduced or transmitted in any

form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the

express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER

®

 is a registered trademark.

ALL RIGHTS RESERVED. © 2003 BEHRINGER Spezielle Studiotechnik GmbH.

BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38,

47877 Willich-Münchheide II, Germany

Tel. +49 2154 9206 0, Fax +49 2154 9206 4903

All manuals and user guides at all-guides.com

Summary of Contents for Europower PMX1000















Reviews: