Page 4 of 5
Power to spare
Cutting-edge technology and high-fidelity
transducers are not all it takes to get your message
across — you need power, and lots of it. At the
heart of the B412DSP are two state-of-the-art
amplifiers totalling 600 watts of output. They’re
capable of driving the speakers to shock volumes
without the slightest hint of distortion. When
it comes to pure output power, the EUROLIVE
B412DSP will simply blow you away with its
massive punch, smooth mids and articulate
top-end — even at 3AM when somebody can’t
resist cranking the system up “all the way”.
Marvelous monitoring
When laid on its side, the B412DSP tilts to
the ideal angle for onstage monitor wedge
applications. With its onboard amplifiers and
dual-band EQ, the B412DSP merges high-fidelity
performance with portability. Hookup is
simple, requiring only a single mic cable from
the monitor send on the mixing console and,
of course, power. Additional monitors can be
chained together via the XLR Line Out jack on
B412DSP’s rear panel.
More than just a PA loudspeaker...
The B412DSP also makes an excellent
onstage monitor for keyboards, acoustic guitars,
or any line-level instrument* for that matter. You
can plug your instrument into Mic/Line 1 and
use the MIC/LINE 2 input to connect the monitor
signal from the PA mixing console, so that you
can also hear the other members of your band.
This opens up lots of possibilities. If you want to
use more than two instruments, you will need
a submixer (e.g. MicroMIX MX400) to mix down
the signals and route them to the B412DSP.
* You will need a special adapter to convert a standard
¼" TS cable to XLR, or a direct injection box like our
ULTRA-DI DI100.
WATTS
24-BIT
DIGITALLY
POWERED
Impact-resistant,
molded enclosure
withstands
years of rugged
abuse. Trapezoid
shape allows it to
function as an ideal
active monitor
when placed on
its side
POWER LED shows
that B412DSP is on
Rubber feet for
stacking enclosure
on structures or
subwoofers
State-of-the-art
1.75" titanium-
diaphragm
compression driver
with heat-resistant
Kapton voice coil
for exceptional
high-frequency
reproduction
Ultra-wide
dispersion and
large format
exponential/
conical horn with
multi-cell aperture
throat
Ergonomically
shaped carry
handles on each
side of enclosure
makes for easy
transport of system
Extremely powerful
12" long-excursion
driver provides
incredibly deep
bass and acoustic
power
35-mm pole
socket in base fits
standard speaker
stands
MIC/LINE 1 & 2 XLR
inputs with built-
in microphone
preamps
EQ HIGH & LOW
controls — cuts or
boosts the treble
and bass range by
15 dB. The cut-off
frequencies are
12 kHz and 100 Hz,
respectively
LOW CUT adjustable
high-pass filter
used to eliminate
unwanted low-
frequency content,
such as popping,
rumble or wind noise
CONTOUR
switch optimizes
the B412DSP’s
frequency response
for either SPEECH
or MUSIC
TIMED TURNOFF
switch automatically
puts the B412DSP
in standby mode
when no signal is
present
Cord socket
accepts standard
IEC cables available
at most computer
and consumer
electronics stores
LEVEL controls —
a 2-channel mixer for
adjusting the signal
gain of the MIC/LINE
inputs. Dedicated CLIP
LEDs light up if signal
levels are too high (just
like a real mixer!)
LINE OUT XLR
jack lets you
connect additional
B412DSPs or similar
active loudspeaker
systems
NOISE GATE
eliminates
unwanted noise
during periods of
program silence.
LED shows when ist
working
EUROLIVE
B412DSP
