Page 3 of 5
a mixer. Add a noisy computer sound output,
a couple of microphones, a guitar with six
stompboxes chained to it and your aunt’s
antique cassette player and you going to hear…
HISSSSSSSSsssssssssss.
Once again, the remarkable digital processing
inside the B412DSP comes to the rescue.
Turn up its Noise Gate and hear background
hiss disappear! The internal computer is
analyzing the sound and selectively cutting out
the hiss without compromising the music!
Instant PA system
With just a single B412DSP loudspeaker
system and one or two dynamic microphones,
you can set up an instant sound system.
Connect microphones directly to the
B412DSP via the built-in mixer section. Put the
Connecting additional B412DSPs
B412DSP on a table-top or speaker stand,
and power up. It’s just that easy. And if
you need more coverage, you can chain
together as many as you like via the
convenient Line Out XLR connector.
Now when you need a small PA,
you can plug a microphone into the
B412DSP right out-of-the-box and start
the show. The rear panel of this speaker
features inputs and level controls for two
microphones or line-level sources such as
MP3 players, audio from a DVD deck or a
laptop computer.
There are also bass and treble master
tone controls and an adjustable Low
Cut filter to help eliminate annoying
breath pops and mic handling noise.
An additional filter, which we call Contour,
allows you to select Speech (for enhanced
voice intelligibility), or Music for the
broader frequency range required for
high-fidelity reproduction of music.
Put this all together and you have a
mixer. Only you get it free built into the
back of the B412DSP.
Custom-designed transducers
Let’s face it; the transducer (speaker)
is the only part of a sound system you
actually hear, so we don’t cut any corners.
While some of our competitors are
content to settle for third-party, off-the-
shelf, one-size-fits-all speakers, we build
our own transducers from scratch.
Not only do we wind our own voice
coils, we process the paper pulp into cones
and even machine metal components. We
assemble them, magnetize them and test
them multiple times.
This enables us to control the quality,
and frankly, make better speakers that
our competition can afford to put into
comparably-priced “dumb” speakers.
For example, both the 12
"
long-excursion
LF transducer and state-of-the-art 1.75
"
titanium driver with Kapton voice coil we
deploy in every B412DSP was specially
designed and built just for this particular
speaker model. There are no compromises
because we did everything ourselves.
EUROLIVE B412DSP
Rear
Mic/ Line 1
Line Out
Mic/Line In
Main Out L
Main Out R
XENYX 2442USB
Rear
Mic/ Line 1
Line Out
Mic/Line In
Continued on next page
EUROLIVE
B412DSP
