2
DIGITAL MULTI-FX FX600
(5)
The
ON/BATT
LED illuminates when the effect is activated. It also
serves as a battery level indicator.
(6)
Use the footswitch to activate/deactivate the effect.
(7)
Use the two 1/4" TS connectors
IN A
and
IN B
to plug in a stereo
input signal. For mono use just plug in IN A.
(8)
The two 1/4" TS connectors
OUT A
and
OUT B
send the signal to
your amp. Use both connectors if you want to achieve full stereo
effect. For mono use just plug in OUT A.
Use the
DC IN
connection at the front of the unit to plug in a 9 V power
supply (not included).
The
BATTERY COMPARTMENT
is located underneath the pedal cover.
To install or replace the 9 V battery, press the hinges with a ballpen and
remove the pedal cover. Be careful not to scratch the unit.
◊
◊
The FX600 has no on/off switch. As soon as you insert the
jack into the in connector, the FX600 begins running.
When not using the FX600, remove the jack from the in
connector. This extends the life of the battery.
The
SERIAL NUMBER
is located at the bottom.
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized
attachments/accessories. Do not service product yourself. Contact our
qualified servicing personnel for servicing or repairs, especially when
power supply cord or plug is damaged.
3. Warranty
Please register your new Behringer equipment right after your purchase
by visiting community.musictribe.com/pages/support#warranty and
read the terms and conditions of our warranty carefully.
4. Specifications
In A
Connector
1/4" TS
Impedance
500 kΩ
Impedance mono
250 kΩ
In B
Connector
1/4" TS
Impedance
500 kΩ
Out A
Connector
1/4" TS
Impedance
1 kΩ
Out B
Connector
1/4" TS
Impedance
1 kΩ
Summary of Contents for Digital Multi-FX FX600
Page 39: ...39 User Manual...
Page 40: ...We Hear You...
