Behringer B-Control-Audio BCA2000 User Manual Download Page 3

Page: 3 / 24

B-CONTROL

AUDIO

BCA2000

BCA
2000

B-CONTROL

AUDIO

High-Speed USB 2.0 Multi-Channel Audio/MIDI Control Interface with ADAT

Support, Surround Outputs

and Extensive Monitor Control Section

High-performance analog input section with 2 state-of-the-art studio-grade IMP Invisible Mic Preamps,

+48 V phantom power plus line and Hi-Z guitar inputs

Ultra-flexible input/output configuration supported by a comprehensive LED audio routing indicator

plus button (status) LEDs

Adjustable studio-grade analog input dynamic control (noise gate + limiter) prevents distorted input signals

or A/D converter overload

Fully equipped USB/MIDI interface with 1 MIDI In/2 MIDI Outs individually selectable for 16 / 32 MIDI

channels

Versatile digital input and output formats like ADAT

, ADAT

S/MUX, AES/EBU and S/PDIF, including

DOLBY DIGITAL

and DTS

support

Simultaneous use of 3 analog input sources (1 mono + 1 stereo), digital input sources plus full multi-

channel playback @ 24-bit/96 kHz

High-resolution 2 x 12 element LED level indicator for stereo In / Out signals plus 2-element LED level

indicator for input and output channels 3 - 8

High-speed USB 2.0 interface with 24-bit/96 kHz supports 8 In + 8 Out channels simultaneously (analog

and digital) with low latency ASIO 2 & WDM drivers

Fully equipped master and monitor sections with 100-mm faders, individual level controls for 2 speakers,

2 phones and direct monitor function plus separate dim, mute and mono functions

High-quality components and exceptionally rugged construction for long life and durability

Designed in Germany. Manufactured under ISO9000 certified management system

Summary of Contents for B-Control-Audio BCA2000

























Search results

Summary of Contents for B-Control-Audio BCA2000

Reviews:

Related manuals for B-Control-Audio BCA2000

Brands by name

Popular brands

Behringer B-Control-Audio BCA2000, User Manual

Search results

Summary of Contents for B-Control-Audio BCA2000

Reviews:

Related manuals for B-Control-Audio BCA2000

Brands by name

Popular brands