– 13 –
197109
© behr Labor-Technik GmbH
0
l
0
l
behrotest
®
In-Line Extraction Unit
Inserting the Glassware
To minimize the risk of breakage,
always hold all glassware in the vicinity
of the standard taper joint!
Lay the cross-shaped distance parts into
the hotplate-flask adapters.
The round-bottom flasks must not be
immediately inserted in the hotplate-
flask adapters; otherwise they could
break on heating. Never operate your
in-line extraction unit without the
distance parts!
Place the round-bottom flask in the flask
adapter on the hotplate.
Check once more the height of the
crossbars with extractor mounts. The
upper end of the neck of the round
bottom flask must protrude several
millimeters into the lower opening of the
extractor mount. This will secure the
flask against tipping over. If necessary,
adjust the height of the crossbars.
Installing the
Flask Adapters
Place the hotplate-flask adapters on the
hotplates.
Take care that the adapters are seated
securely on the hotplates and cannot
slip off sideways.
