18
8.
Installation
The installation and commissioning of the System should only be undertaken by trained
specialists. Handling glass and UV-RADIATION requires special care. If you are in doubt,
please contact us. All contact details are on the first page.
The opening and installation of the device is only permitted when there is no water
pressure and no connection to electrical power. Before cleaning, maintenance or the
exchange of parts the system should be safely isolated from the electricity supply.
1.
When installing, please consider free space for lamp change and general
maintenance.
See System description 7.
2.
Protect against direct solar irradiation and against frost.
For general installation of the UV equipment, please see drawing, 7.
For horizontal
installation must be ensured the ventilation in the UV reactor. In addition, the UV sensor
should not stand up, only horizontally or downwards to be installed in the water ring.
3.
Installation of the UV-device should be completed with appropriate rubber lined
clamps or other suitable means (PVC-type).
4.
Earthing/Grounding of the reactor and Switch Cabinet should be completed
according to local Regulations.
5.
Fastening connections to the input/output (and to sampling valve).
6.
Test for hydraulic pressure integrity in the reactor water. (Outlet key in the
accessories).
7.
Install the switch cabinet in a suitable place.
Please consider Cable lengths for
plug and lamp cable.
8.
Attach the lamp connector to the socket.
Caution
this can only be connected in
one orientation
. Do not force the connection. Please ensure a good, snug fit.
9.
The sensor and measuring window are screwed into the sensor connection in the
middle of the reactor. When installing the sensor screw connection, please note the
groove and notch arrangement. When the screw connection is secured, the installation
conforms to IP 65.
10.
Optional! Cable connection for safety devices produce! For this purpose
11.
Either ‘hard wire’ or use a plug and socket to connect to the mains depending on
your local regulations.