5-1-1
SECTION 5
P1351 AC POWER SUPPLY OPTIONS
The P1350 series of AC power supplies is available with several options. These can be specified at the time
of purchase or added as required by end user.
Table 5-1 below listed the available options for this model
series. Behlman also produces modified versions of this unit that may be application specific. These units
will be assigned a 4 digit “engineering” number. Any information required for operation will be added to this
manuals as an addendum.
OPTION
DESCRIPTION
PART #
RM
EIA rack mounting bracket kit.
107-822-000
RO
*
Rear panel NEMA 5-15R added to rear panel.
107-821-000
LC001
Line Cord : IEC-320-C20 to NEMA 15P
107-802-000
LC002
Line Cord: IEC-320-C20 to NEMA 5-20P
107-802-002
L
Locking device fitted to front panel VOLTS & FREQ controls.
N/A
A, I, or R
Remote control ( see below )
N/A
* Note: options A, I, or R options are not considered field installable and must be factory installed .
Call a Behlman Sales representative for pricing and further information.
5.0
REMOTE CONTROL OPTIONS
The model P1351 is available with one of three choices of remote control options. The table below
summaries these options.
OPTION TYPE INTERFACE FEATURES
GPIB
REAR PANEL IEEE 488
Computer control of output voltage,
frequency, and range read back of
voltage, frequency, and current. Status
reporting.
RS 232
REAR PANEL 9 PIN “D”
Same as GPIB option
ANALOG REMOTE
REAR PANEL 9 PIN “D”
Isolated 0 to 10 VDC control of frequency
and voltage. Digital control of output relay
and range switching via opto- coupled 5 to
18 VDC input
Additional information will follow this page if the unit supplied incorporates one of these remote
options. For more information, contact the Behlman Sales office or local representative or Email
questions to [email protected].
