BEHABELT HP01, Instruction Manual

Page: 42 / 86

42
7.0 PPuls Quick Reference
This is not an operation manual!
Before using the unit refer to operation manual!
The operating instructions contain information and references required for safe
operation and use of the instrument.
Before using the instrument, read the operating manual instructions carefully
and follow them in all respects.
Welding cycle
Press key :
•
short to display current temperature and time settings
•
long to change current temperature and time settings
Change settings by entering number using number keypad, to confirm and to
cancel.
Press key to start welding process.
Temperature and time settings
Short press: display settings.
Long press: change parameters using number keys.
Start/Stop
Start welding process using the current set parameters
(platen temperature, welding time,…).
Recipe storage
Select and safe preconfigured temperature-and time settings.
System-Settings
Set Alarm, Cool-down temperature and Operation mode for T3 temperature
probe. All other system settings.