Inserting a disk
Hold the disk so that the arrow symbol is at the top and points away from
you. Now insert the disk in the drive slot provided. The disk has been
correctly inserted when the grey ejection button has popped out.
Removing a disk
Press the ejection button next to the drive slot. You can now remove the
disk.
Never remove the disk while the drive is being accessed, i.e. when the LED
indicator for the drive is illuminated. Otherwise, you could damage the drive
and the disk.
Power Supply
The power supply automatically adjusts itself to the particular voltage. The
power output of the power supply is maximum 150 W.
The power cord receptacle and the ON/OFF switch are located on the back
of the power supply. At the front side of the BEETLE /NetPOS you will find
the ON/OFF button which will turn on the system if the ON/OFF switch at
the rear side of the external power supply is in the position ON. Pushing the
ON/OFF button again (push at least 4 sec.) will turn the system into the
Stand by mode.
25
POWER SUPPLY
ejection button
