BEETEL 450TC3, User Manual

Page: 49 / 75

The Static Route Table shows the current static route entries.
5.3.1.2 RIP
RIP is an internet protocol you can setup to share routing table information with other routing
devices.
Go to Advanced->Route->RIP page, you can configure the RIP settings. Here you can enable or
disable the RIP function.

RIP
enable or disable the RIP function of the router.

Interface
the interface on which you want to enable RIP

Recv Version
indicate the RIP version in which information must be passed to the device it can be accepted
into its routing table

Send Version
indicate the RIP version this interface will use when it sends its route information to the other
device