BEETEL 450TC3, User Manual

Page: 58 / 75

the source mask of the rule

Destination IP
the destination IP address of the rule

Destination Mask
the destination mask of the rule

Source Port
the source port number of the rule. If the protocol filed is not been selected or is selected as
ICMP, the Source port filed can‟t be configured.

Destination Port
the destination port number of the rule. If the protocol filed is not been selected or is selected
as ICMP, the Destination port filed can‟t be configured.

Protocol
the protocol of the rule. It can be TCP, UDP, ICMP and TCP/UDP.

Phy port
the incoming port of the rule. It indicates the physical port of the traffic is incoming.

IPP/DS Field
the traffic will be classified on the base of this policy. It can be based on stream, IPP/TOS or
DSCP.

802.1P
select an 802.1p priority level between
0
and
7
.

Priority
select lowest priority, highest priority or other priority
5.3.4 CWMP
CPE WAN Management Protocol (CWMP) is a protocol for communication between a CPE and
Auto-Configuration Server (ACS). The CPE TR-069 configuration should be well defined to be
able to communicate with the remote ACS.
Go to Advanced->CWMP page, you can configure the TR-069 CPE. Here you may change the
setting for the ACS‟s parameters.