BEER Uno Top Hot, Instructions For Installation And Start-Up

Page: 7 / 25

Beer Grill AG Beer Grill GmbH
Allmendstrasse 7 Tel. +41 (0)56 618 7800 Körnerstrasse 14 a Tel. +49 (0)71 61 659 876 info@beergrill.com
CH
– 5612 Villmergen
Fax +41 (0)56 618 7849 D
– 79539 Lörrach
Fax +49 (0)71 61 659 879 www.beergrill.com
Seite 7
Figure 3
Pull the sneeze screen forward (1).
Fit the front glass panel and turn it to the
Inside (2).
Push sneeze screen back into place (3).
Warning!
If the front glass is resting on the upper edge of the glass holder on one side (see figure 5),
it can easily fall out and cause severe injuries if touched!
Figure 4
Upper glass holder (5a).
If the guide (5b) is loose or missing, the front glass panel has
no more hold on the upper side!
The front glass panel must be removed and may only be refitted after
The side panel (5 c) has been replaced.
Figure 5
Lower glass panel holder

with front glass panel resting on its
Upper edge. The front panel can slip out to the side or to the
Front if touched.
3 Start up
Danger of fire!
Before first start up remove all packing and padding material.
Construction
The Uno Top Hot consists of basic unit, an upper part and a water bin.
Uno Top Hot with warm and cold light:
Ceran glass
plate
Water bin Universal frame