Beeper HYB01-10, Installation & Use Manual

Page: 11 / 60

11
SAFETY INSTRUCTIONS
Always use your product following the process described in this manual.
Your product is designed only to charge an electric vehicle according to standard IEC-62196 with connector
VDE-AR-E 2623-2-2 called “Type 2” on the 230V single-phase or 400V three-phase electrical network. Never
use it for any other purpose or with any other vehicle or object.
Use your product only on an electrical installation that complies with the standards in force in your country or
region.
Visually inspect your product before each use. Stop using it if it has the slightest defect such as a crack, bare
cable, oxidation of the contacts, signs of burns or more generally if it no longer works.
Never attempt to open, disassemble, repair, alter or modify your product. Any attempt to do so will automatically
void the warranty of the device irreversibly. Contact our After-Sales Service in the event of a breakdown.
The use of an extension cord, multiple socket, conversion plug to plug in your product is strictly prohibited
Do not use a generator to power your product.
Do not plug your product into a damaged, loose, or damaged outlet. Make sure that the connector pins fit snugly
into the wall outlet and that the wall outlet is plugged in all the way.
Do not use your product in extreme weather conditions (heavy rain, snow, thunderstorms, bad weather,
heatwave).
When handling and transporting, do not subject your product to severe shock, twisting, or crushing.
Protect your product from moisture, especially during storage. If it looks damaged or corroded, do not use it.
If it rains while charging, do not allow water to run down the cable to the charging port, wall outlet, or charging
station base.
CONTENT OF YOUR PRODUCT 2
SAFETY INSTRUCTIONS 11
EXPLODED VIEW 12
COMPATIBILITY 13
TECHNICAL CHARACTERISTICS 14
INSTRUCTIONS 16
SOLUTIONS IN CASE OF PROBLEMS 17
DECLARATION OF CONFORMITY 18
TECHNICAL ASSISTANCE & WARRANTY 18
LEGAL NOTICE 18
SUMMARY