Beem M34.001, User Manual

Page: 22 / 56

20
Cyclone Mega-Clean EN
BEEM - Elements of Lifestyle
Electrical connection of the
charging station
For safe and trouble-free operation of the
charging station, the following instructions
on the electrical connection must be ob-
served:
Before connecting the appliance, ■
compare the connection data (voltage
and frequency) on the rating plate with
those of your mains power supply. The
data must correspond in order to avoid
damage to the appliance. If in doubt,
ask your electrical appliance retailer.
The mains socket must be protected
■
by at least a 10 A automatic circuit
breaker.
Ensure that the mains cable is undam-
■
aged and is not laid over sharp edges.
The mains cable must not be pulled
■
tightly, bent or come into contact with
hot surfaces.
Route the mains cable to prevent risk
■
of tripping.
The electrical safety of the appliance
■
is only assured when it is connected
to a properly installed protective earth
(PE) conductor system. Connection to
a mains socket without PE conductor
is forbidden. If in doubt, the electrical
system must be checked by a qualified
electrician. The manufacturer assumes
no liability for injury or damage caused
by a missing or interrupted protective
earth conductor.
Startup
Unpacking
Remove the appliance, all accessory
‹
parts and the user manual from the
box.
Remove all packaging materials and
‹
protective foils from the product and
the accessories before using it for the
first time.
NOTE
Do not remove the rating plate or ►
any warning signs on the appliance.
If possible, keep the original packag-
►
ing during the guarantee period in
order to be able to pack the ap-
pliance properly in the event of a
guarantee claim. Transport damage
will invalidate the guarantee.
Check the delivery contents
Check for visible signs of damage or
‹
missing items.
Report incomplete or damaged con-
‹
tents to your supplier immediately.