Beem M34.001, User Manual

Page: 27 / 56

25
EN Cyclone Mega-Clean
BEEM - Elements of Lifestyle
Troubleshooting
The following table will help you locate and eliminate minor faults:
fault Possible cause Remedy
The charging control indi-
cator of the hand vacuum
cleaner does not light
up after it is put onto the
charging station.
Charging station power
adapter not plugged in.
Insert plug.
Automatic circuit breaker in
electrical distribution board
tripped.
Switch on the automatic
circuit breaker again.
Rechargeable battery is fully
charged.
Hand vacuum cleaner is
ready for operation.
Hand vacuum cleaner was not
put into the charging station
correctly.
Put the hand vacuum
cleaner correctly into the
charging station.
The automatic circuit
breaker in the electrical
distribution board trips.
Too many appliances connect-
ed to the same power circuit.
Reduce the number of
appliances on the power
circuit.
No fault detected.
Contact customer
service.
The appliance does not
function after pressing the
ON/OFF switch.
Battery not charged Charge the battery.
Vacuum performance is
inadequate.
Battery not charged Charge the battery.
Dust container full up Empty dust container.
Dust container not correctly
inserted.
Insert dust container
correctly
Clogged filter element. Clean the filter element.
NOTE
If you cannot resolve the problem with the steps described above, please contact ►
customer service.