Beem Leopard G5, User Manual

Page: 23 / 56

21
EN Leopard G5
BEEM - Elements of Lifestyle
Using the Kebbe attachment (image C)
Insert the screw conveyer (13) into the
‹
attachment (11).
Put the Kebbe shaper (21) onto the
‹
screw. The notch in the Kebbe shaper
must lie over the keyway of the at-
tachment.
Put the Kebbe attachment (20) onto
‹
the Kebbe shaper (21).
Screw on the locking ring (16).
‹
Making shortbread biscuits (image D)
Insert the screw conveyer (13) into the
‹
attachment (11).
Put the large perforated disc (15c)
‹
onto the screw. The notch in the per-
forated disc must lie over the keyway
of the attachment (image E).
NOTE!
The perforated disc must be ►
mounted so that the screw conveyer
is held in position.
If you select a perforated disk with
►
small holes, the appliance will be-
come too hot during operation. The
fat in the batter will melt and drip out
of the shortbread biscuit mould.
Put the shortbread attachment (18)
‹
without pusher onto the perforated
disc.
Screw on the locking ring (16).
‹
Insert the pusher into the shortbread
‹
attachment.
NOTE!
You can choose the shape of the ►
biscuit by pushing the pusher of the
attachment into the desired shape.
If you turn the locking ring too tightly,
►
the appliance will also become too
hot during operation. Turn the lock-
ing ring back about half a turn.
Assembling the attachment
(image F)
Assemble the attachment for the de-
‹
sired application as described in the
section Preassembly (page 20) .
Insert the preassembled attachment
‹
into the fixture (8).
Turn the attachment clockwise until it
‹
audibly snaps in.
Put the tray (3) onto the feed
‹
shaft (10).
Removing the attachment
(images G1 and G2)
Remove the tray.
‹
Press and hold down the release but-
‹
ton (4), turn the attachment (11) clock-
wise an pull off the attachment.
Unscrew on the locking ring (16).
‹
Remove all parts from the attachment.
‹