Beem G-1030ST-E-CERAMIC, Instruction Manual

Page: 20 / 56

BEEM – Elements of Lifestyle
20/56
Steam
quantity
adjustment
(on the iron
station)
Temperature
adjustment
(on the iron)
Textile / Fabric Recommendations
•
Iron off
Iron dry (steam
ironing not
possible)
Synthetic
• Synthetic
fibre
• Acetate
• Nylon
(polyamide)
• Acrylic
• Acetate
(artificial silk)
• Viscose
• Silk
• Rayon
(polyester)
Iron dry and preferably
inside out.
Wool/Silk
• Wool
• Silk
Place a cloth over the
material when ironing
and preferably iron
inside out.
Cotton/Linen
• Cotton
• Linen
• Ramie
Iron whilst still slightly
damp.
MAX
• Cotton
• Linen
• Ramie
Generally insensitive
and ideally suited to
steam ironing.
NOTE: Please bear in mind that the utensil needs some time to cool down when
you reduce the temperature setting.
• First check whether the item of clothing has a label with ironing instructions. (The
ironing instructions are on a label with an iron symbol. The number of dots indicates
the correct temperature.) Always observe the instructions on the label and in the
settings table.
• If the item of clothing has no label but you are familiar with the material, observe the
table above. The table refers to the basic material and not to any coatings or gloss
applications.
• Textiles with special surfaces (smooth, creased, etc.) should be ironed at low
temperatures.
• If an item of clothing is made from different materials, always choose the lowest
specified ironing temperature. An item of clothing with 60% polyester and 40% linen
should be ironed at the temperature for polyester and without steam.
• Sort the materials according to the ironing temperatures. Wool to wool, cotton to
cotton, etc. The iron heats up quicker than it cools down. Therefore you should iron
materials with lower ironing temperatures first. Then iron the materials with higher
ironing temperatures.
6.1
Preparation
1. Make sure the mains plug is removed.
2. Place the steam generator where you want to use it.
3. Press up the release knob in the recessed handle of the water tank and pull the water
tank out of its rest.
4. Take the filter cartridge out of the tank opening.