Beef Eater signature plus Page 2 Assembly And Operating Instructions Manual Download

Page: 2 / 36

CONTENTS

Important safety instructions ��3
Gas cylinder safety ��4
Gas leak test procedure ��4
Tools required ��5
Assembly instructions ��6
Installation instructions ��9
Assembly and gas connection instructions for side burner ��10
Assembly instructions for trolley ��11
Operating instructions ��18
Hood assembly instructions��22
Getting the most from your roasting hood ��23
Help guide ��25
Care and maintenance ��27
Locating your barbecue and side burner ��31
Outdoor installation instructions �� 32
Specifications �� 33
Notes �� 34
Warranty ��35

Please read the user manual carefully and store in a handy

place for later reference�

The symbols you will see in this booklet have these

meanings:

WARNING

WARNING

This symbol indicates information concerning your

personal safety.

WARNING

CAUTION

This symbol indicates information on how to avoid

damaging the appliance.

TIPS & INFORMATION

IMPORTANT

This symbol indicates tips and information about use

of the appliance.

ENVIRONMENTAL TIPS

ENVIRONMENT

This symbol indicates tips and information about

economical and ecological use of the appliance.

Dear customer,

Congratulations and thank you for choosing our barbecue�

We are sure you will find it a pleasure to use� Before you use

the barbecue, we recommend that you read through the

relevant sections of this manual, which provide a description

of your appliance and its functions�

To avoid the risks that are always present when you use

an appliance, it is important that the appliance is installed

correctly and that you read the safety instructions carefully to

avoid misuse and hazards�

We recommend that you keep this instruction booklet

for future reference and pass it on to any future owners�

After unpacking the appliance, please check it is not

damaged� If in doubt, do not use the appliance but contact

your local customer care centre�

This appliance complies with requirements of Australian

Standards AS4557�

CONDITIONS OF USE

These important notes apply to your appliance

• This appliance MUST be installed and serviced only

by a qualified licensed person�

• This product is intended for personal, domestic or

household use only, not commercial use�

• This product is intended for outdoor use only�

• This product must be installed, operated and maintained

as per the instructions�

• Ventilation holes in the unit must not be obscured by the

installation�

Please ensure you read the instruction manual fully

before you call for service, or a full service fee could

be applicable.

Record model and serial number here:

Model number: ��

Serial number: ��

PNC: ��

CONTENTS

CONGRATULATIONS

Summary of Contents for signature plus





































Search results

Summary of Contents for signature plus

Reviews:

Related manuals for signature plus

Brands by name

Popular brands

Beef Eater signature plus, Assembly And Operating Instructions Manual

Search results

Summary of Contents for signature plus

Reviews:

Related manuals for signature plus

Brands by name

Popular brands