Operations
To prevent damage to your eyes, never look directly into the light
source.
Connect the mains cable provided to the mains jack (3) and then to a
socket (230 V~ / 50 Hz). The unit is then ready for operation and may
be operated via a DMX light controller or may independently execute the
control program that has been set.
For DMX control, connect DMX cables to DMX IN (5) et DMX OUT (6).
To define the unit settings, use the system menu which can be operated
with the buttons (1) and the display (2). After power switch-on, the moving
head will first conduct a reference move for position adjustment; then the
operating mode most recently set will be indicated on the display.
Auto Mode - without DMX controller
The unit provides automatic show programs, no need controller ! just
Plug&play.
1) Press the button
MODE/ESC
until the display indicates :
EASy.
2) Press the button
ENTER
to confirm your choice.
3) Press the button
UP&DOWN
, select the desired mode:
MAFA,-
MASL,MStc and MStS.
4) Press the button
ENTER
to confirm your choice.
Note: More details about Modes in previous page.
