IMPORTANT INSTRUCTIONS
USER OPERATING MANUAL – MODEL 1222NA/2222EU
Revision 1.0
P a g e | 8
BedJet VET Operating Modes:
Note: Standard operating functions are supported by the Wireless Remote Control. Utilize the
Bluetooth linked BedJet Veterinary App from your smartphone or tablet computer to unlock
advanced features.
The BedJet main power switch (under the power cord) must be turned ON for the remote
control to operate the BedJet. Once the power switch is ON, the BedJet will beep once and
orange Power ON LED will light to indicate successful boot-up of the internal
microcontroller. The BedJet is now in standby mode ready to take commands from the
remote.
Activate the BedJet by pressing the desired temperature mode button on the remote once.
A single beep confirms an ON command.
Deactivate BedJet into standby by pressing the same temperature mode button again. A
double beep confirms a mode OFF command.
While active in any given heating/cooling mode, pressing a different mode button will
switch heating/cooling modes without shutoff of the BedJet. The BedJet will beep once to
indicate the mode change.
Adjust the Air Flow using the “+” or “-“ buttons on the remote to increases or decreases the
heating/cooling power to the warming blankets. The BedJet will beep once for each
increase/decrease. Press and hold the buttons for rapid increase or decrease.
Press the Shutoff Timer Advance button to increase the time left on the auto-
shutoff function above the default time settings (see table below).
Press the Mute button on remote control to silence all beeps. Press again to
reactivate beep acknowledgement of remote commands.
