Bedfont G210, Operating Manual

Page: 7 / 15

5
Medi-Gas G210
English
Monitoring Procedure
The G210 monitor should be connected to the gas
outlet safely by using a MED-REG-KIT supplied
by Bedfont Scientific Ltd. At each outlet, allow for
a stable reading. We recommend testing outlets
the same method as calibration, with a Y-piece
connector (ensuring that the gas is vented away
from the user) and testing with the pump activated
when using the MED-REG-KIT.
Peak Reading
The operator can toggle the reading mode
between normal (current) and peak readings.
Whilst in peak reading mode the instrument will
only display peak values for each of the channels.
These values can be stored by pressing the ‘store’
key or automatically at the appropriate logging
interval (if logging is enabled).
Store Reading
The ‘store’ reading option allows the operator
to store the current reading. Upon selecting this
option the operator is then prompted to enter or
select a ‘Site ID’ and ‘Sample Point ID’ to identify
the reading. Select the ‘Accept’ button to confirm
the ID choices.
Hold Reading
The ‘Hold’ reading option allows the operator to
freeze the currently displayed reading. This allows
it to be manually recorded or moved away from the
sample point. To activate, press the soft key ‘Hold’
and the readings are fixed until the ‘Hold’ key is
pressed again or until the reading is stored.
Note: Please be careful not to leave the hold button
activated
Area Store Hold Peak
O2 20.9%
N20 0.1%
CO2 500 ppm
CO 0.1 ppm
Area Store Hold Peak
O2 20.9%
N20 0.1%
CO2 500 ppm
CO 0.1 ppm
Area Store Hold Peak
O2 20.9%
N20 0.1%
CO2 500 ppm
CO 0.1 ppm
Area Accept Reject
Select ID
1 -Site ID
test ID
2 -ID
test ID