Bed-Check Vr, User Manual

Page: 6 / 24

4
Patient’s Information:
• Patient’s ID.
• Cumulative time the unit has been in service with the particular patient.
• The response times for the last twenty-four alarms.
• The average response time for the last four alarms.
• The last response time.
• Time and date of the last twenty-four alarms, and response times to the
alarms.
Exportable Outcome-Based Information of Last 24 Alarms for Database/
Spreadsheet Analysis
• The exported file name will default to the patient ID.
• Date of each alarm.
• Time of each alarm.
• Response time to each alarm.
Reset Information
• Reset the patient information to erase all.
Information Subject to Output to Printed Report or Computer File
• Information that is depicted on the screen can be sent to the printer for
assimilation with patient files or management reports;
• Information that is depicted on the screen can be sent to a text (*.txt) file
for later printing or export to a word processing program; and,
• Alarm history can be exported to a comma delimited file that can be
imported into a spreadsheet (database) program.
Alternatively, the control unit can be put into service as it is shipped to you. You
may choose to disregard and not utilize the programmable/printable features of
the control unit.
The control unit’s factory default settings are:
1) The tone option is set to a medium beep
2) The nurse call relay action is set to a normally open system
3) The hold delay time is set to 5 seconds
4) The alarm delay time is set to 3 seconds.
Bed-Check ® will pre-set optional settings at the factory if requested at the
time the order is placed. Contact your Distributor for more details.
For Manual Programming Please Refer to the Model Vr Program Guide (CD)
and Appendix G therein or the section entitled Manual Programming Guide on
page 9 of this manual.