3
How The Bed-Check
®
(Outcome Based)
System Can Work For You
Introduction
The Bed-Check
®
Model Vr Control Unit’s functions are accessible and program-
mable through a laptop or personal computer. The listings below describe the
programmable functions of the Control Unit and the accessible statistics main-
tained by the Control Unit. You may refer to the Model Vr ACCESS Program’s
manual (CD) for further information.
Programmed/Inputted Operating Characteristics
• Setup the Printer Port.
• Limit the external ability to set the Alarm Delay time in seconds to a
range of 1 to 3 seconds versus a normal range of 1 to 9 seconds.
(Reducing Alarm Delay can restrict manual programming functions.)
• Input Patient ID.
• Audible Reset Alarm can be enabled or disabled.
• Nurse call system - normally open or closed.
• Select the Tone Option and change the type of alarm sound to the one
best suited for the patient.
• Select the Relay Action - type of electrical impulse needed by the nurse
call system.
• Select the Hold Time in seconds before
MON
itoring begins, from 1 to 20
seconds.
• Alarm Delay time in seconds, from 1 to 9 seconds.
• Volume of the alarm.
• Define the Control Unit’s operating Default settings for all of the above.
• Input the last Bio-Med Date of service.
Printable Outcome-Based Information
Unit Information:
• All of the above operating characteristics.
• Unit serial number and manufactured date.
• Total cumulative time the unit has been in service since inception.
• Date of the last Repair/Maintenance Authorization (RMA) and number by
Bed-Check
®
.
• The last date the control unit was serviced by Bio-Med.
Summary of Contents for Vr
