© BECOM Systems 2020
8
|
58
Software User Manual - Argos3D - P33x
Last change: 29 June 2020/Version 10
1
General Information
This guide applies to the Argos3D - P33x camera platform from BECOM Systems. Follow this guide chapter by
chapter to set up and understand your product. If a section of this document only applies to certain camera parts,
this is indicated at the beginning of the respective section.
1.1
Symbols Used
This guide makes use of a few symbols and conventions:
Warning
Indicates a situation which, if not avoided, could result in minor or moderate injury and/or
property damage or damage to the device.
Caution
Indicates a situation which, if not avoided, may result in minor damage to the device, in
malfunction of the device or in data loss.
Note
Notes provide information on special issues related to the device or provide information that will
make operation of the device easier.
Procedures
A procedure always starts with a headline
1.
The number indicates the step number of a certain procedure you are expected to
follow.
Steps are numbered sequentially.
This sign
indicates an expected result of your action.
References
This symbol
indicates a cross reference to a different chapter of this manual or
to an external document.
