manualshive.com logo in svg

Beckmann EMS 133 E, Product Deion & Operating Manual, Page: 22 / 38

Share
Download
Beckmann EMS 133 E Product Deion & Operating Manual Download Page 22

Product Description & Operating Manual EMS 13x / 23x / 33x 

Page 22 

 

Beckmann GmbH © 2003 

4.  

Day [C]

 

Þ

 Set the day of the month.  

5.  

Month

 

[C]

 

Þ

 Set the month. 

6.

 HH timer 1 start time[C]

 

Þ

 Start time for Happy-Hour timer 1 (HHT1) [0:00..23:45 h]. Set in 

15 min intervals. Standard: 0:00 h.  
7. 

HH timer 1 end time

 

[C]

 

Þ

 End time for HHT1 [0:00..23:45 h]. Standard: 0:00h. 

8.

 Timer 1 Monday

 

[C]

 

Þ

 Determines if HHT1 should be activated on Mondays. Standard: NO. 

09. - 14. Determines if HHT1 should be activated on Tuesday through Sunday respectively. 
15. - 23. Settings for  HHT2. 
24. - 32. Settings for HHT3. 
33. - 41. Settings for HHT4. 
42. - 50. Settings for HHT5. 

3.2.6  Sub-menu  6  Miscellaneous  

1.  

Test run /  emergency stop

 

[D]

 (Master display)

Þ

 If the device is free, a test run of 2 min in 

length can be started with this point. The display shows:   
 

Test/Stop        m 

   START    

↓

01

↓

 

 

The test run can be started with the green key. The device starts immediately (without warm 
up phase).  

Test/Stop        m 

               

↓

01

↓

    STOP  

 

The red key stops the device in operation. The ventilation continues for the prolonged 
ventilation time (M4N3), but can be stopped ahead of time by pressing the red key once more. 
If the timer is a master timer, a flashing ‘m’ will be shown on the display. 
A timer is a master timer if: 

• 

It is the only timer  

• 

It has the lowest network node number (M6N5) in the network.. The master timer switches 
the rest of the timers in the network (slaves) between normal and Happy-Hour mode if the 
Happy-Hour timers are programmed appropriately. 

This parameter allows one to discover disruptions in the EMSBUS network. If, for example, 8 
timers are connected to the network, and timer number 5 reports itself as master, then there is 
a disruption in the EMSBUS between timer 4 and 5. 
 

2.  

Clear daily cash [D]

 

Þ

 Pressing the red key deletes the following parameter values: Cash daily 

(M1N1), Token daily (M1N2), Card daily (M1N3), Customers daily (M1N5) and recharging 
daily (M1N10). After deletion, the display shows the following:   

 

Daily cleared 

         

↓

02

↓

    CLEAR 

 

 

Summary of Contents for EMS 133 E







































Reviews:

No comments